Been a while since we had an update here, but i can confirm that the raspberry Pi 5 does indeed fit in the raspad3 although you have to be careful installing it as the cables are rather tight.
@Mike Parker take a photo of the inside of your raspad3 so i can make sure you have it all connected correctly.
your very welcome, if you need anymore help just post and will endevor to help you out.
@Mike Parker then u have a setup problem as im using the 64bit OS now and its running fine with 2 monitors, i would suggest a fresh install, as you have proved yourself that the hardware works and ...
@Victor Loewen you can try this but right click on touch screen is a known issue with the OS and not something i can help with as there is no 100% working solution.https://www.raspberrypi.com/docum...
@Victor Loewen Audio is handled kind odd with the raspad as it works through the hdmi cable, if you right cick on the speaker icon on the left of the taskbar you will see a list of 3 items (hdmi1, ...
@Mike Parker check cables both monitors should work without any modification.
@Dave Curthoys The raspberry pi does not have any audio input natively to use a mic you will need a usb dac or a usb specific mic.
@Michael Blomquist im not no but no reason it cant be made to work that why i said start a new thread if you really want to use the launcher and will work to get it working although personally i do...
Yes we are a tad off topic start a new thread for the launcher if you need more support with that.
@RasPad Support he shows in first iage that with only short hdmi connected the second display does not work. second picture using long hdmi instead the second screen works, so as he says loo...
as i said it work just fine with 64bit on the raspad3. the spam is gone as i have been clearing it one by one, until they can sort the spam filters.
@Michael Blomquist err what?!? The raspad3 can 100% run the new raspberry Pi OS 64Bit (bullseye) im sat typing on it now.
@Andi Dinata yep sounds like a faulty cables hopefully the support team can sort you out with replacements when they see your message :)
@Michael Blomquist this is an OS level issue, no raspad hardware is connected to bluetooth and RPI team have been pushing alot of updates to the software drivers to run bluetooth recently. Also wh...
The touch screen will only work when no external screen is connected that is by design of the raspad team and can only be changed by modifing the mainboard of the raspad, and the team sadly have no...
no you need the cables for the screen to function.
This sadly is due to a flaw in the Pi4 models that cause some to be very sensitive to EMF and as such wifi is affected, this then becomes an problem when the pi is in the raspad as it would seem th...
@A R is the berry screen upside down or just the login page?
@A R ohh i see what your doing lol, the Raspad3 is already up the right way from the start you dont even need to rotate the screen, remove the line. lcd_rotate=2 you dont even need it with Raspa...
@A R ok try this config, you had some error icluding a typo and you can not set hdmi_enable_4kp60=1 as the screen doesnt support that. # For more options and information see # http://rpf.io/co...
Hmm that very odd, you deffinately have something odd going on as i know it works as im currently looking at it working with RPI OS 64bit. Would need to see you config.txt and cmdline.txt files to ...
@A R i can see your mistake right away :) lets get you sorted. You have messed yourself up by using an outdated commands and the correct commands at same time, so basicly undoing your work. in yo...
@RasPad Support replacement board has arrived and is working perfectly thanks.
@Philip Graff yes that looks like the film is still on its possible the green tab was just missing but i cant be 100% so wait and see what @RasPad Support say before doing anything.
@JD Springer ok your making very little sense, has your problem been resolved as from your reply im not sure as you still havent given any images and you say about a new ribbon cable but then ask w...
@Philip Graff with out a picture of the device i am unable to assist you with this as it possible there is a protective film on the screen but could not say if yours definately does as you have not...
no problem, happy to see you got it working.
Go to Menu > Preferences > Raspberry Pi Configuration and then go to interfaces tab and enable I2C
Can you provide pictures of the device both the screen and the inside of the device, then we can start to help you get your issues sorted.
its very hard to help with this as you havent provide any output of the install command so i cant see if there was any errors, so do 2 commands for me to be better able to help you. run sudo i2cd...
Dont forget they are based in china and with timezones and language issues it can take time for them to reply just be patient. @Lennie Johansson
Hi Lennie, send your order/backer details and what you failure is in a PM to RasPad Support account and they will be able to help you out. Funny thing is i have just had same failure on my own rasp...
In terminal type this sudo nano /boot/config.txt Then add the line: lcd_rotate=2 save and exit ( ctrl+x ) and reboot. If you have a line that say " display_rotate " then delete it as its no lo...
@M C ok that makes it easier to help you, i would not want to use the raspad3 in a live event type eviroment it just wont hold up to the task, going down the custom route or getting something like ...
@M C what exactly are you trying to achieve ? as then i might be able to better help you with answering all your questions in one thread and not lots of little ones.
@M C 1. Nope there is no case its a developement platform not something to be carried around like a normal tablet, but its a standard 10inch screen so any screen protector for tablet that size wil...
As other drives and devices work, that would lead me to think that its not defective but what could be the case is the usb hub inside the raspad doesnt support high speed usb drives as its design a...
can you run this command and post the output now your on a fresh install and follow the setup proceedure above, as im guessing there was no error messages with the install as you havent stated any....
Have you tried plugging the drive directly into the RPI itself is it then recognised? yes keyboard hub is usb2
that should be possible, depending on the tranceiver you use.
@Travis Southard its a OS level function why would it be on the raspi preferences? at this stage raspi is just an overlay of RPI OS with extra touch functions, and you ahve said your using a ...
Right click on the volume icon on the menu bar and select the correct output.AV = headphone jack on the pi HDMI 1 = External display speakers HDMI 2 = internal speaker But " Raspberry Pi OS Bull...
You would need to contact PeterCxy about his script as its impossible to support third party scripts, and its not a hardware issue but a problem with that script.
@elijah keller no, this one. Do a full fresh install of Raspberry Pi OS and start from scratch, once installed follow https://docs.raspad.com/en/latest/install_rotating_screen_service.html...
@elijah keller read up one message and follow that, joys of linux sometimes you just have to start again.
@elijah keller do a full fresh install of Raspberry Pi os and start from scratch, once installed follow https://docs.raspad.com/en/latest/install_rotating_screen_service.html again. the syst...
@elijah keller scratch that try this they posted for another user. https://docs.raspad.com/en/latest/install_rotating_screen_service.html
@elijah keller try this, the raspad staff really need to look at their script, so poorly designed. sudo mkdir .raspad-auto-rotator and then go to that new lcoation with cd .raspad-au...
the location was in the error message " /home/root/.raspad-auto-rotator/ " so enter these commands cd /home/root/.raspad-auto-rotator/ if it says that the location doesnt exist then type this ...
