I would suggest a fresh install also. Maybe try another micro SD card, although I think if you use the Raspberry Pi Imager app it will detect a bad image. I have also been using the 64 bit OS for a...
Posts made by Michael Blomquist
-
Drivers of the display board in Raspberry Pi OSposted in General Discussion
-
Drivers of the display board in Raspberry Pi OSposted in General Discussion
I would like to reopen the discussion concerning a 64-bit build of the RasPad operating system. I have installed the 64-bit RPi Bullseye OS in my RasPad and it works great. Really great. RasPad Sup...
-
Bluetoothposted in General Discussion
There probably isn't a need for another thread as I already have my answer from Support. Just a clarification from you, CerberusStyle. You said you are using the 64-bit RPi OS Bullseye on your RasP...
-
Bluetoothposted in General Discussion
Speaking to the forum and also CerberusStyle. Those instructions at the link are likely for installation on a 32-bit OS. Sunfounder hasn't updated any installation instructions that I can find. I d...
-
Bluetoothposted in General Discussion
Trying to get the 64-bit Debian Bullseye with desktop to work on my RasPad 3. It installs and boots just fine. I can't get the RasPad Launcher to work though. Using the instructions from here: htt...
-
Bluetoothposted in General Discussion
It was mentioned in this thread https://raspad.com/community/forum/topic/30191/drivers-of-the-display-board-in-raspberry-pi-os I'll be doing some utilities soon, reformatting and chec...
-
Bluetoothposted in General Discussion
Running the 32-bit OS. I already asked about the recent 64-bit OS released from beta and RasPad Support says the RasPad can't run it. Hopefully there will be a version soon that will. Oh, and I use...
-
Drivers of the display board in Raspberry Pi OSposted in General Discussion
@RasPad Support OK. Are there any future plans for an x64 Raspbian that will operate on the RasPad?
-
Bluetoothposted in General Discussion
Also, when it is connected and left unattended for a time it becomes unresponsive and takes a little while to wake back up again. I don't know how long that time is, and I'm not really sure what it...
-
Bluetoothposted in General Discussion
Does anyone else have troubles connecting to a Bluetooth keyboard? I have already paired the keyboard with the RasPad, but I have to turn the keyboard off and on three times to get it to connect. I...
-
Drivers of the display board in Raspberry Pi OSposted in General Discussion
Wondering now that we have a 64 bit Raspberry Pi OS out of beta, will it work with RasPad Launcher? Also, can't something be done about the spam filth that has attacked our user forum?
-
no menubar on raspberry pi osposted in General Discussion
I have a similar setup, RPi 4 with 8GB RAM. I used a 64 GB SD card, which required some special formatting. The instructions for that can be found with a Google search. Then I followed the instruct...
-
Battery of RasPad3 after shutdownposted in General Discussion
I usually have something to do with my Raspad at least once a week. To keep an eye on battery SoC, I will invariably connect up the charging circuit and observe the charge status LED before turning...
-
No cableposted in General Discussion
Interesting that "No Cable" shows up during the boot sequence. When you formatted your SD card and copied the Raspad OS to it, did you see a message yes or no to fully utilize all the space on the ...
-
HDMI cable too shortposted in General Discussion
I noticed the same issue with cabling during my assembly. What worked for me was to attach all the cables with the Pi board loose and then carefully afix the Pi board to the RasPad case. Make sure ...
-
RasPad Zipper Caseposted in General Discussion
@RasPad Support Oh, that's OK. It sounds like someone is working on it then. All I wanted to know.
-
RasPad Zipper Caseposted in General Discussion
Anybody have any luck locating a storage case for the RasPad? I've searched Amazon and various other websites and really haven't found anything that will work. There are tablet cases that fit the d...
-
No soundposted in General Discussion
I had an audio problem with my RasPad when I first started using it. Specifically, no audio from a YouTube video in the Chromium browser. I thought maybe a problem with a cable or the soundcard, so...
-
Battery of RasPad3 after shutdownposted in General Discussion
@CerberusStyle Agreed. Lets hope a simple firmware update can make that change.👍
-
Battery of RasPad3 after shutdownposted in General Discussion
I always press and hold the power button after executing a shutdown in RasPad OS and seeing the No Cable message (possibly indicating that the RPi board has shut down?) After a 2 second hold you wi...
-
No cableposted in General Discussion
Yes, +1 on the correct FAT32 file format. There are a number of sites offering instructions and links to free formatters. I believe I used the Mini Tool Partition Wizard and perhaps the SD Card For...
-
Raspad 3.0 : First impressions.posted in General Discussion
I also fitted a Pi 4 Model B 8 Gb card in my RasPad case and found that the daughter board cabling was a little tight and could possibly cause connection problems. I cabled everything and then care...
-
Adding at touch sensitive penposted in Suggestions
Let me put in a plug for the Three Layer Folding Touchpad Keyboard that Sunfounder carries. I've been using this with my RasPad since purchase and it's really a time-saver and easily makes for accu...
Search
Latest posts
Forum statistics
- Page views (24h):
- 131
- Page views (30d):
- 5,596
- Topics:
- 92
- Posts:
- 749
- Members:
- 8,285
Newest members
Most liked authors
-
CerberusStyle
103 -
Jay Bee
66 -
